Blokbatterijen  (300 artikelen gevonden)

Due to the high terminal voltage 3.6V they are not suitable as direct replacements for other battery technologies in the same can sizes. SAFT Lithium Non-rechargeable Batteries - LS. These batterie...

Where packs of NiMH cells multiple voltage by 1.2V. Varta Microbattery NiMH Rechargeable Button Cell Battery with PCB Pins. Varta NiMH Button rechargeable batteries are a sealed, slim designed batt...

PCB Mounting Lithium Thionyl Chloride Cells. A 1/2 AA 3.6V 1200 mAh Lithium Thionyl Chloride from Saft. This battery is a non-standard sizes battery designed for reliability in specialist applicati...

Saft A Lithium-ion BatteryThe Saft 3600mAh lithium-ion A size battery is hermetically sealed in stainless steel cans and has a nominal voltage of 3.6V. This battery is suitable for long-term applic...

Where packs of NiMH cells multiple voltage by 1.2V. Varta Microbattery NiMH Rechargeable Button Cell Battery with PCB Pins. Varta NiMH Button rechargeable batteries are a sealed, slim designed batt...

This button battery from Tadiran features a nominal voltage of 3.6 V with a 550 mAh capacity. This lithium thionyl chloride button battery has a 24 mm diameter and a height of 5.6 mm.

Battery Sizes Charged = 6 V, 12 V Output Voltage = 24V Plug Type = EU Batteries Included = No Model Number = CHB-12

VHR Series High Charge Rate. 1.2V and 3.6V NiMH rechargeable coin cell, 24.1 x 34.1 mm High energy density, reduced volume and cost, convenient ring tagging for an engineer maximum design flexibili...

Model Number = ER34615 Chemistry = Lithium Thionyl Chloride Nominal Voltage = 3.6V IEC Name = IEC60086-4 Terminal Type = Standard

Where packs of NiMH cells multiple voltage by 1.2V. Varta Microbattery NiMH Rechargeable Button Cell Battery with PCB Pins. Varta NiMH Button rechargeable batteries are a sealed, slim designed batt...

Yuasa RoHS Certified NiMH Rechargeable Battery Emergency Lighting Stick. The Yuasa Emergency lighting battery is an NiMH stick design battery specially designed to handle industrial high temperatur...

Do not charge in a sealed enclosure. These batteries should be charged with a constant voltage charger at 2.3 V per cell standby and 2.5 V per cell with a current limit of 0.25 x capacity (Ah) for ...