Assortiment
Kantoorartikelen
IT-producten
Gereedschappen
Elektrotechniek
Bedrijfsinrichting
Arbeidsveiligheid
Industriële benodigdheden
Medisch & Laboratorium
Gebouwentechniek
Verzending & Verpakking
Horeca
Reiniging
Meer categorieën
Nederland
Nederlands
Deutschland
Deutsch
English
Österreich
Deutsch
English
Nederland
Nederlands
English
Italia
Italiano
English
France
Français
English
España
Español
English
United Kingdom
English
Ireland
English
Polska
Polski
English
Magyarország
Magyar
English
Schweiz
Deutsch
Français
Italiano
English
België
Nederlands
Français
Deutsch
English
Mijn Mercateo
Aanmelden/Registreren
Inloggen
Nieuw bij Mercateo?
Nu registreren
>
Mijn profiel
Bestelarchief
Inkooplijsten
Bestelaanvragen
Winkelwagen
Startpagina
>
Auto
>
Auto-accessoires
>
Navigatiesysteem
>
Houder navigatie
>
Artikelnaam
Brodit Active Holder, Tilt Swivel
Aantal:
stuk
Productinformatie
Venster sluiten
Artikelnr.:
CINL9-3246590
Merk:
Brodit
Fabrikantnr.:
971742
EAN/GTIN:
7320282122928
Zoekwoorden:
Houder navigatie
Houders navigatie
Houder navigatiesysteem
Houders navigatiesystemen
For fixed installation, with Molex adapter system. 2A charger. The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
With the Molex adapter system you can get power for a Bluetooth GPS receiver etc. (The device does not support datatransfer.)
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform. Please read all of the instructions and look at the pictures before attaching the holder. Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse holder and fuse inline with the Red wire close to the power source. Route the cable from the holder into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Note: If you are connecting a GPS/Data device to the holder please ensure the charger unit is located in a position within easy reach of any GPS or charging adapters.
Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.
Installation of the holder: 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate. 4. The holder is in place.
... >
Computers & accessories
>
Componenten
>
Houders
Andere zoekwoorden:
Navigatiesysteem houder
,
Navigatiesysteem houders
,
houder navigatie
,
telefoonhouder
Overzicht van de condities
1
Levertijd
Voorraad
Prijs excl. BTW
vanaf € 71,75*
Prijs geldt vanaf 500 stuks
Voorwaarden zelf selecteren
Aanbevelen
Toevoegen aan inkooplijst
Staffelprijzen
Bestelhoeveelheid
excl. BTW
incl. BTW
Eenheid
1 stuk
€ 92,39*
€ 111,79
per stuk
vanaf 2 stuks
€ 91,41*
€ 110,61
per stuk
vanaf 5 stuks
€ 87,82*
€ 106,26
per stuk
vanaf 10 stuks
€ 84,41*
€ 102,14
per stuk
vanaf 500 stuks
€ 71,75*
€ 86,82
per stuk
* Prijzen excl. BTW
Mercateo verkoopt uitsluitend aan zakelijke klanten.
Over ons
Ondersteuning
Pers
Carrière
Algemene Voorwaarden
Impressum
Privacy
Duurzaamheid
Privacy-instellingen