Resisto, integrated LED weatherproof luminaire, with UV stabilized flat diffuser designed to achieve uniform lit appearance, optimise light output and to reduce glare. 301 stainless steel diffuser clips and fixing brackets for surface mounting. Polycarbonate housing and diffuser - no yellow discolouration over time. 2800lm; 20W; 140lm/W; 4000K; SDCM<5; CRI80; IP66; IK08 (sensor IK03); Class I; 69,000hrs (L80B20) lifespan; 1293mm x 87mm x 80mm; D-mark; SylSmart Connected Industry enabled.
 | |
Protection class: | I |
Width: | 87.000 mm |
Conductor cross section: | 0.000 mm² |
Connection type: | Push-in clamp |
Colour housing: | Grey |
Voltage type: | AC |
With movement sensor: | true |
Type of control gear: | LED operating device current-controlled |
Colour rendering index CRI: | 80-89 |
With light sensor: | false |
Suitable for suspended mounting: | true |
Number of poles: | 5.000 |
Length: | 1293.000 mm |
Height/depth: | 80.000 mm |
Material housing: | Plastic |
Lamp type: | LED exchangeable |
Suitable for light line configuration: | false |
Suitable for emergency lighting: | false |
Material cover: | Other |
Impact strength: | IK08 |
Nominal voltage: | 220.000 V | 240.000 V |
Emergency power supply integrated: | false |
Degree of protection (IP): | IP65 |
With light source: | true |
Luminaire with limited surface temperature, sign "D“: | true |
Covering of the luminaire with thermally insulating material possible: | false |
Suitable for built-in mounting: | false |
With control gear: | true |
Suitable for workplace according to EN 12464-1: | false |
Suitable for surface mounting: | true |
Beam angle: | Extreme wide beam >80° |
Nominal current: | 83.300 mA | 95.700 mA |
Colour temperature: | 4000.000 K |
Max. system power: | 20.000 W |
Rated luminous flux according to IEC 62722-2-1: | 2800.000 lm |
With air slots: | false |
Constant light output (CLO): | false |
IFTTT support available: | false |
Type of wiring: | Ending |
Rated life time L70/B50 at 25 °C: | 100000.000 h |
Colour consistency (McAdam ellipse): | SDCM3 |
Total harmonic distortion: | 10.000 |
Photobiological safety according to EN 62471: | RG1 |
Rated ambient temperature according to IEC62722-2-1: | -20.000 °C | 40.000 °C |
Filament test according to IEC 60695-2-11: | 850 °C - 30 s |
Dimming 0-10 V: | false |
Dimming 1-10 V: | false |
Dimming DALI: | false |
Dimming DMX: | false |
Dimming potentiometer (integrated): | false |
Dimming LineSwitch: | false |
Dimming manufacturer's proprietary system: | true |
Dimming mains voltage modulation: | false |
Dimming phase cut-off: | false |
Dimming phase cut-on: | false |
Dimming programmable: | false |
Dimming RF: | false |
Dimming Sine Wave Reduction: | false |
Dimming Touch and Dim: | false |
Dimming Zigbee: | false |
Dimming with push-button: | false |
No dim function: | false |
Light distributor: | Diffuser lens/optic/panel |
Luminaire efficacy: | 140.000 lm/W |
Dimming DSI: | false |
Unified Glare Ratio (UGR): | 22.000 |
Operation by Bluetooth: | false |
Compatible with Apple HomeKit: | false |
Compatible with Google Assistant: | false |
Compatible with Amazon Alexa: | false |
Max. number of luminaires per miniature circuit breaker C16: | 0.000 |
Max. number of luminaires per miniature circuit breaker B16: | 16.000 |
Dimming DALI-2: | false |
Colour temperature adjustable: | No |
Beam angle adjustable: | No |
Exchangeable control gear: | false |
Suitable for ceiling mounting: | true |
Surface protection housing: | Untreated |
Power factor: | 0.950 |