 | |
Protection class: | II |
Width: | 595.000 mm |
Lamp holder: | Other |
Connection type: | Push-in clamp |
Colour housing: | White |
Voltage type: | AC |
With movement sensor: | false |
Suitable for lamp power: | 25.000 W | 30.000 W |
Type of grid: | None |
Type of control gear: | LED operating device current-controlled |
Colour rendering index CRI: | 80-89 |
With light sensor: | false |
Suitable for suspended mounting: | true |
Number of poles: | 2.000 |
Length: | 595.000 mm |
Height/depth: | 33.000 mm |
Material housing: | Aluminium |
Lamp type: | LED not exchangeable |
Suitable for light line configuration: | false |
Suitable for emergency lighting: | true |
Light outlet: | Direct |
Light sharing: | Symmetric |
Material cover: | Plastic, opal |
Impact strength: | IK02 |
Nominal voltage: | 230.000 V |
Emergency power supply integrated: | false |
Degree of protection (IP): | IP20 |
With light source: | true |
Covering of the luminaire with thermally insulating material possible: | false |
Suitable for number of lamps: | 1.000 |
Suitable for built-in mounting: | true |
With control gear: | false |
Suitable for workplace according to EN 12464-1: | true |
Suitable for surface mounting: | true |
Beam angle: | Extreme wide beam >80° |
Nominal current: | 800.000 mA |
Colour temperature: | 3000.000 K |
Max. system power: | 30.000 W |
Rated luminous flux according to IEC 62722-2-1: | 3750.000 lm |
Colour of light: | White |
With air slots: | false |
Type of wiring: | Ending |
Colour consistency (McAdam ellipse): | SDCM3 |
Rated ambient temperature according to IEC62722-2-1: | -10.000 °C | 40.000 °C |
Filament test according to IEC 60695-2-11: | 650 °C - 30 s |
Light distributor: | Diffuser lens/optic/panel |
Luminaire efficacy: | 125.000 lm/W |
Unified Glare Ratio (UGR): | 19.000 |
Suitable for ceiling mounting: | true |
Surface protection housing: | Lacquered |
Power factor: | 0.950 |