Deze Acti 9 SmartLink Modbus Slave is een slimme communicatiemodule met 11 kanalen. Het communiceert met de hulpelementen iACT24 voor iCT-contactoren, iATL24 voor iTL-impulsrelais, iOF+SD24 voor iC60, iID, ARA, RCA & iSW-NA. Deze moet worden gekoppeld aan een Master SmartLink SI B dankzij de Modbus RS485-connector. Het wordt gebruikt om gegevens van Acti 9-apparaten over te zetten naar een PLC of netwerkbewakingssysteem dankzij de Ethernet-connector. Het communiceert ook met OF+SD24 voor C60, C120, DPN, ID & C60H-DC, Ti24 voor RCA iC60 & Reflex iC60. Het wordt geleverd met 1 voedingsconnector 24VDC, 2 bouten voor montage op Linergy FM80. De verbinding is Modbus, RTU, RS485 seriële verbinding. De overdrachtsnelheid kan automatisch worden aangepast van 9600 tot 19200 baud. Het Modbus het richten waaier is 1 tot 99. Het is een 4-pins connectortype van bus. Het is een plug-inverbinding. De maximumlengte van de bus is 1000m. De maximale kabellengte is 500 m. De spanningsvoeding is 24VDC +/-
| |
Width: | 359.000 mm |
Height: | 23.000 mm |
Depth: | 42.000 mm |
Input current at signal 1: | 2.500 mA |
Suitable for safety functions: | false |
Number of digital inputs: | 22.000 |
Number of digital outputs: | 11.000 |
Number of analogue inputs: | 0.000 |
Number of analogue outputs: | 0.000 |
Voltage type of supply voltage: | DC |
Supporting protocol for LON: | false |
Number of HW-interfaces industrial Ethernet: | 0.000 |
Number of HW-interfaces RS-232: | 0.000 |
Number of HW-interfaces RS-422: | 0.000 |
Number of HW-interfaces RS-485: | 1.000 |
Number of HW-interfaces serial TTY: | 0.000 |
Number of HW-interfaces USB: | 0.000 |
Number of HW-interfaces parallel: | 0.000 |
Number of HW-interfaces other: | 0.000 |
With optical interface: | false |
Type of voltage (input voltage): | DC |
Supporting protocol for TCP/IP: | false |
Supporting protocol for ASI: | false |
Supporting protocol for PROFIBUS: | false |
Supporting protocol for CAN: | false |
Supporting protocol for INTERBUS: | false |
Supporting protocol for KNX: | false |
Supporting protocol for Modbus: | true |
Supporting protocol for Data-Highway: | false |
Supporting protocol for DeviceNet: | false |
Supporting protocol for SUCONET: | false |
Supporting protocol for other bus systems: | false |
Output voltage at digital output: | 24.000 V |
Output current at digital output: | 0.100 A |
Analogue input, current: | false |
Analogue input, voltage: | false |
Analogue input, resistor: | false |
Analogue input, resistor temperature: | false |
Analogue input, thermocouple: | false |
Analogue input signal configurable: | false |
Short-circuit protection, digital outputs available: | true |
Type of digital output: | Other |
Type of electric connection: | Plug-in connection |
Rail mounting possible: | false |
Explosion safety category for gas: | None |
Explosion safety category for dust: | None |
Fieldbus connection over separate bus coupler possible: | false |
System accessory: | true |
Appendant operation agent (Ex ia): | false |
Appendant operation agent (Ex ib): | false |
Degree of protection (IP): | IP20 |
Supporting protocol for SERCOS: | false |
Supporting protocol for INTERBUS-Safety: | false |
Number of interfaces PROFINET: | 0.000 |
Number of HW-interfaces Wireless: | 0.000 |
Front built-in possible: | false |
Rack-assembly possible: | false |
Wall mounting/direct mounting: | true |
Radio standard Bluetooth: | false |
Radio standard Wi-Fi 802.11: | false |
IO link master: | false |
Performance level according to EN ISO 13849-1: | None |
Supporting protocol for AS-Interface Safety at Work: | false |
Supporting protocol for DeviceNet Safety: | false |
Supporting protocol for EtherNet/IP: | false |
Supporting protocol for Foundation Fieldbus: | false |
Supporting protocol for PROFINET CBA: | false |
Supporting protocol for PROFINET IO: | false |
Supporting protocol for PROFIsafe: | false |
Supporting protocol for SafetyBUS p: | false |
Supply voltage DC: | 24.000 V |
Permitted voltage at input: | 19.200 V | 28.800 V |
Type of output voltage: | DC |
Digital inputs configurable: | true |
Analogue inputs configurable: | true |
Analogue outputs configurable: | false |
Digital outputs configurable: | true |
Radio standard GPRS: | false |
Radio standard GSM: | false |
Radio standard UMTS: | false |
SIL according to IEC 61508: | None |