|  |
| |
| Artikelnr.:
8LSXD-TFS15 Fabrikantnr.:
TFS15 EAN/GTIN:
4067201358121 |
| | |
|
| | |
| These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D correspond to the dimensions of ball bearing series 63, except for TFS 12. With keyway on the inner ring and two radial, face-side grooves on the outer ring on both sides.
Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.
Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. If the tolerance of the housing inner diameter for the freewheel TFS is K6, no feather keys are required on the end face grooves of the freewheel. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.
Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.
Temperature range: approx. -10°C to + 50°C.
Other versions on request. |
| | |
| | | |
| Andere zoekwoorden: Inlegspieën, Spie, Spieën, Inlegspie DIN 6885, Spie DIN 6885, din 6885, ASNU 8 ASNU 10 ASNU 12 ASNU 15 ASNU 20 ASNU 25, Tsubaki TFS 35 Tsubaki TFS 40 Tsubaki TFS 45 Ts, Klemmkörperfreilauf Klemmkoerperfreilaeufe Klem, ASNU8 ASNU10 ASNU12 ASNU15 ASNU20 ASNU25 ASNU30, TFS 12 TFS 15 TFS 17 TFS 20 TFS 25 TFS 30 TFS 3, Tsubaki TFS 12 Tsubaki TFS 15 Tsubaki TFS 17 Ts, TSF 12 TSF 15 TSF 17 TSF 20 TSF 25 TSF 30 TSF 3, Einbaufreilauf Einbaufreilaeufe Einbaufreiläufe |
| | |
| |