|  |
| |
| Artikelnr.:
8LSXD-BSEU70-50 Fabrikantnr.:
BSEU70-50 EAN/GTIN:
4067201358824 |
| | |
|
| | |
| he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications.
Keyway: according to DIN 6885-1.
Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring.
Lubrication: Lubricated for life with low temperature grease.
Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us.
Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway.
When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks.
Use the frame or a pin to eliminate outer race rotation.
Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage.
A clearance of 0.5 mm must be set between the torque arm and the customer‘, s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel.
Other versions on request. |
| | |
| | | |
| Andere zoekwoorden: Inlegspieën, Spie, Spieën, Inlegspie DIN 6885, Spie DIN 6885, din 6885, Tsubaki BSEU 70-60 Tsubaki BSEU 70-65 Tsubaki B, Tsubaki BSEU 25 20 Tsubaki BSEU 25 25 Tsubaki B, Tsubaki BSEU 25/20 Tsubaki BSEU 25/25 Tsubaki B, AV20 AV25 AV30 AV35 AV40 AV45 AV50 AV55 AV60 AV, FAV 20 FAV 25 FAV 30 FAV 35 FAV 40 FAV 45 FAV 5, Tsubaki BSEU 70/60 Tsubaki BSEU 70/65 Tsubaki B, Klemmkörperfreilauf Klemmkoerperfreilaeufe Klem, Tsubaki BSEU 40-35 Tsubaki BSEU 40-40 Tsubaki B, Tsubaki BSEU 70 60 Tsubaki BSEU 70 65 Tsubaki B, Tsubaki BSEU 40/35 Tsubaki BSEU 40/40 Tsubaki B, Anbaufreilauf Anbaufreilaeufe Anbaufreiläufe, Tsubaki BSEU 25-20 Tsubaki BSEU 25-25 Tsubaki B, FAV20 FAV25 FAV30 FAV35 FAV40 FAV45 FAV50 FAV55, AV 20 AV 25 AV 30 AV 35 AV 40 AV 45 AV 50 AV 55, Tsubaki BSEU 40 35 Tsubaki BSEU 40 40 Tsubaki B |
| | |
| |