|  |
| |
| Artikelnr.:
8LSXD-68580300 Fabrikantnr.:
68580300 EAN/GTIN:
4067201168676 |
| | |
|
| | |
|
Material: Metal parts: Steel, zinc-plated. Elastomer: Natural
rubber, hardness 55° Shore.
Metal on one side only. Metal bumpers can be used to limit bearing
surfaces e.g. for elastically mounted power units, and as bump stop to
limit the spring travel in vehicles. They can also be used for machines
that cannot be fixed to the floor or are standing on floors with an
easily damaged surface, e.g. office machines. * Fperm. is the
permissible static permanent load, which may be overlaid by a dynamic,
alternating load. With shearing load please take care that no tension
load in the rubber occurs at all during mounting. To achieve a
sufficient fatigue strength provide some compressive pre-stressing. The
stated permissible loads are only approximate, guideline values for the
static load for ", medium", rubber hardness. With particularly high,
dynamic, alternating loads or high frequencies, the load figures have to
be reduced accordingly. Temperature resistant up to 80°C.
Meer informatie: | | Material: | Natural rubber / Steel | Surface: | Zinc-plated | Outer diameter D: | 25 [mm] | Height H: | 15 [mm] | Thread size G: | M 6 [mm] | Thread length I: | 18 [mm] | Spring rate medium CD: | 254 [N/mm] | Pressure load F<sub>zul.</sub>: | 280 [N] | Weight: | 17,2 [g] |
|
| | |
| | | |
| Andere zoekwoorden: Rubberen metaal stopper, Rubberen metalen stoppers, GM-buffer, GM-demper, Rubber dempers, Rubber demper, Rubberen buffer, Rubber buffer, rubber dempers, rubber buffers, Gummipuffer, rubber buffer, MGS, Gummi-Metall, Metallanschlagpuffer, Metall-Gummipuffer, Metall-Anschlagpuffer, buffers, Metall-Gummi, buffer, Anschlagpuffer |
| | |
| |