|  |
| |
| Artikelnr.:
8LSXD-64862800 Fabrikantnr.:
64862800 EAN/GTIN:
4067201273141 |
| | |
|
| | |
|
Material: Aluminium. Screw stainless steel A2-70.
Single-split clamp collars, as end-stops on spline shafts.
These rings don´, t damage the shaft. The clamping force is much stronger
than with set collars. They are easy to readjust.
Version 1: The thread of the screw DIN 912 is covered with a
layer of nylon.
Version 2: with additional nut, for adjusting the inner diameter
and as lock nut.
Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C.
Meer informatie: | | Material: | Aluminum | Surface: | Blank | Profile type: | KN 32 x 38 [mm] | Version: | 2 | Outer diameter A: | 60 [mm] | Inner diameter d: | 32 [mm] | Length L: | 15 [mm] | R<sub>max.</sub>: | 66,0 [mm] | Screw (DIN 912): | M 6 x 18 | Wrench size of nut sw: | 10 [mm] | Weight: | 76 [g] |
|
| | |
| | | |
| Andere zoekwoorden: 5463, DIN5463, DINISO14, Klemmring, collar, DIn ISO 14, Keilwellenprofil, schmal |
| | |
| |