|  |
| |
| Artikelnr.:
8LSXD-61550224 Fabrikantnr.:
61550224 EAN/GTIN:
4067201267898 |
| | |
|
| | |
|
Material: Steel.
- For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
- For medium torques.
- Self-centering.
- With a second hexagon to hold against while tightening the nut.
- Axial offset during mounting (can be compensated by correct positioning).
Mounting
It is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.
Demounting
Hold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. Meer informatie: | | Material: | Steel | Type: | TMK-A | Design (shape): | Cylindrical with central nut | Self-centering: | Yes | Surface: | Blank | Inner diameter d: | 24 [mm] | Outer diameter D: | 38 [mm] | Length L: | 41 [mm] | L<sub>1</sub>: | 20 [mm] | B: | 10 [mm] | Transmissible torque T: | 381 [Nm] | Admissible axial force F<sub>ax</sub>: | 31,7 [kN] | shaft surface pressure P<sub>W</sub>: | 181 [N/mm<sup>2</sup>] | hub surface pressure P<sub>N</sub>: | 134 [N/mm<sup>2</sup>] | Wrench size SW: | 46 [mm] | Tightening torque fastening screw T<sub>A</sub>: | 250 [Nm] | Weight: | 315 [g] |
|
| | |
| | | |
| Andere zoekwoorden: Spannhülse Spannhülsen Spannhuelse Spannh, locking assembly, locking device, locking assemblies, Spannbuchse, Kontermutter, Spannsatz, TMK |
| | |
| |