|  |
| |
| Artikelnr.:
8LSXD-61524000 Fabrikantnr.:
61524000 EAN/GTIN:
4067201117162 |
| | |
|
| | |
|
Material: Steel. The MSD clamping bush consists of a
double-walled, hardened steel sleeve filled with a special pressure
medium, a seal, a piston, a compression flange and fastening screws.
When tightening the screws, the sleeves expand evenly against shaft and
hub, creating a rigid connection. When the screws are loosened, the bush
returns to its initial position and can be easily demounted.
Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for
Product No. 615 215 00 only h7), Hub H7 Advantages: -fast
mounting/demounting -sensitive adjustment of the hub can be carried out
during assembly -low fastening torque and few screws allow very simple
assembly. -good concentricity -small dimensions allow little ouside
diametre of the hub MN = transmittable torque at load of 0. If the
screws are fastened with Manz. Fa = transmittable axial force at torque
of 0. If the screws are fastened with Manz. Manz = required fastening
torque for the screws. The dimensions refer to bushes before assembly. Temperature
range: -30° to +85°C.
Meer informatie: | | Material: | Steel | Type: | MSD | Design (shape): | With flange, hydraulic | Self-centering: | Yes | Surface: | Blank | Inner diameter d: | 40 [mm] | Outer diameter D: | 53 [mm] | D<sub>1</sub>: | 70 [mm] | Length L: | 63 [mm] | L<sub>1</sub>: | 43 [mm] | L<sub>2</sub>: | 68 [mm] | Transmissible torque T: | 940 [Nm] | Admissible axial force F<sub>ax</sub>: | 47,0 [kN] | shaft surface pressure P<sub>W</sub>: | 90 [N/mm<sup>2</sup>] | hub surface pressure P<sub>N</sub>: | 70 [N/mm<sup>2</sup>] | No. of bolts (pcs): | 6 | Thread size: | M 5 | Tightening torque fastening screws T<sub>A</sub>: | 8 [Nm] | Weight: | 0,55 [kg] |
|
| | |
| | | |
| Andere zoekwoorden: Spannsatz, locking couplings, locking assemblies, clamping set, Spannbuchsen, Spannhülse Spannhülsen Spannhuelse ..., Spannsätze, locking device, locking assembly, clamping sets, Spannbuchse, MSD, Welle-Nabe-Verbindung |
| | |
| |