|  |
| |
| Artikelnr.:
8LSXD-60093000 Fabrikantnr.:
60093000 EAN/GTIN:
4067201115267 |
| | |
|
| | |
|
Material: Steel C45 burnished. Temperature range from -40°C to
+175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all
couplings are covered with a layer of polyamide. Thus the bolts do not
loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN
6885/1, Tolerance P9. The torques in the table are maximum values which
can only be achieved with perfect mounting and dimensional accuracy of
the shaft.
Meer informatie: | | Material: | Steel (C45) | Stainless: | No | Coupling type: | Rigid two-piece stlye | Max. speed: | 4.000 [U/min] | Max. misalignment radial: | 0 [mm] | Max. misalignment axial: | 0 [mm] | Max. misalignment angle: | 0 [°] | with keyway: | Yes | Electrically insulating: | No | Temperature min: | -40 [°C] | Temperature max: | 175 [°C] | Surface: | Black oxide finish | Max. torque T: | 475 [Nm] | Bore diameter d: | 30 [mm] | Outer diameter A: | 53 [mm] | Max. outer diameter over screw head R: | 58,1 [mm] | Total length L: | 83 [mm] | Screw ISO 4762 (Thread size x length): | M 6 x 18 | Tightening torque fastening screws T<sub>A</sub>: | 16 [Nm] | Weight: | 920 [g] |
|
| | |
| | | |
| | | |
| |