|  |
| |
| Artikelnr.:
8LSXD-36072600 Fabrikantnr.:
36072600 EAN/GTIN:
4067201091639 |
| | |
|
| | |
| Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
Up to module 5 with crowned, milled teeth.
From module 6 with planed teeth. Not hardened –, not lapped.
Shaft angle = 90°.
The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. Meer informatie: | | Material: | Steel (11SMn30) | Tooth quality: | 8 | Surface: | Blank | Ratio i: | 1:1 (40/40) | Module: | 1,5 | No. of teeth: | 40 | Outer diameter d<sub>a</sub>: | 62,1 [mm] | d: | 60 [mm] | ND: | 40 [mm] | NL: | 12 [mm] | L<sub>1</sub>: | 25 [mm] | L: | 27,7 [mm] | S: | 19,1 [mm] | b: | 12,7 [mm] | Bore B<sup>H7</sup>: | 15 [mm] | E: | 48 [mm] | Max. torque MD: | 2,46 [Nm] | Weight: | 310 [g] | optional counter wheel (Part-No.): | 36072600 |
|
| | |
| | | |
| | | |
| |