|  |
| |
| Artikelnr.:
8LSXD-36023200 Fabrikantnr.:
36023200 EAN/GTIN:
4067201083900 |
| | |
|
| | |
| Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
Up to module 5 with crowned, milled teeth.
From module 6 with planed teeth. Not hardened –, not lapped.
Shaft angle = 90°.
The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. Meer informatie: | | Material: | Steel (11SMn30) | Tooth quality: | 8 | Surface: | Blank | Ratio i: | 1:1 (50/50) | Module: | 0,5 | No. of teeth: | 50 | Outer diameter d<sub>a</sub>: | 25,7 [mm] | d: | 25 [mm] | ND: | 14 [mm] | NL: | 5 [mm] | L<sub>1</sub>: | 8,5 [mm] | L: | 9,5 [mm] | S: | 7,5 [mm] | b: | 3 [mm] | Bore B<sup>H7</sup>: | 4 [mm] | E: | 19,6 [mm] | Max. torque MD: | 0,108 [Nm] | Weight: | 16 [g] | optional counter wheel (Part-No.): | 36023200 |
|
| | |
| | | |
| | | |
| |