Electrotherm Digital Transducer

EMC Emission and Noise immunity : EN 61326-1:2006 EN 61326-2-3:2006. LKM S1 Universal Interface see RS Stock number 9130857. LKM 262 Digital Programmable Measuring Transducer. The LKM 262 is a digital programmable measuring transducer which is for mounting on a standard rail. The transducer can be programmed for different thermocouples according to DIN EN 60584-3. The LKM 262 converts the temperature dependent thermoelectric voltage of the sensors temperature linearly into a standard signal. The signal ranging from 0 to 10V. The temperature compensation is effected within the measuring transducer itself. The measuring transducer can be programmed by using the universal interface, LKM S1 which is available from RS. An adjusting controller allows immediate minor display corrections. Input: thermocouples K, J, L, T, U, E, N, S, B, R, C in the respective range of definition Zero: -200 to 600°C* depending on thermocouple Range: 50K Linearity error: 0.3K depending on the thermocouple Measurement error: 0.2% Error of reference junction: +/- 0.5°C Supply voltage: 15 to 35VDC, 15 to 26VAC reverse polarity protected Maximum current consumption: 20mA Output: 0 to 10V programmable Sensor break: 10V Short-circuit: voltage value for room temperature Response time: 0.5s TC: 100ppm/°C Operating temperature range: -40 to 85°C Moisture: 95% Mounting: 35mm DIN-rail Housing: Polycarbonate 75x25x53mm Type of terminals: screw terminals Clamping range: 0.2 to 2.5mm² Weight: approx. 60g Vibration: 5g/10 to 200Hz