|  |
| |
| Artikelnr.:
2949E-514142 Fabrikantnr.:
HK 4012 EAN/GTIN:
geen gegevens |
| |
|
| | |
| SKF Drawn Cup Needle Roller Bearings Series HK. SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity. Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required Meer informatie: | | Inside Diameter: | 40mm | Outside Diameter: | 47mm | Roller Bearing Type: | Needle | Race Width: | 12mm | Bore Type: | Parallel | Material: | Metal | Static Load Rating: | 24.5kN | Cage Material: | Sheet Steel | Number of Rows: | 1 | Dynamic Load Rating: | 13.4kN | End Type: | Open | Fatigue Limit Load: | 2.8kN | Maximum Speed - Grease: | 5000rpm | Maximum Speed - Oil: | 7000rpm |
|
| | |
| | | |
| Andere zoekwoorden: 514142, Bearings & Seals, Rotary Bearings & Housing Units, Roller Bearings, SKF, HK4012 |
| | |
| |