|  | | | | | | | | Afbeelding | | | | Bestellen | | | 98% |
|
24168300 prec.-rack m.2,0 20x20x500 (1 zoekresultaat) Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight tee... |
|
vanaf € 305,15*
per stuk |
| 98% |
|
24299605 rack 1.4305 m.2,5 25x25x1000 (1 zoekresultaat) Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manuf... |
|
vanaf € 256,88*
per stuk |
| 98% |
|
24460500 Gear rack C45K m.4,0 40x40x1000 (1 zoekresultaat) Material: Bright steel C45K. Milled teeth. Precisely Straightened. Width tolerance h11. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gea... |
|
vanaf € 171,07*
per stuk |
| 98% |
|
25360510 prec.-rack m. 3,0 length 1000 (1 zoekresultaat) Material: High-quality, specially treated bright steel with approx. 900 N/mm², tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous link... |
|
vanaf € 285,53*
per stuk |
| 98% |
|
22868500 prec.-rack m. 1,5 15x15x1000 (1 zoekresultaat) Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight tee... |
|
vanaf € 568,43*
per stuk |
| 98% |
|
22899602 rack 1.4305 m.1.5 15x15x250 (1 zoekresultaat) Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manuf... |
|
vanaf € 78,31*
per stuk |
| 98% |
|
24211609 rack in steel m.2,5 25x25x2000 (1 zoekresultaat) Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is... |
|
vanaf € 131,64*
per stuk |
| 98% |
|
24563000 rack from steel m.5 Ø50h6x250 (1 zoekresultaat) Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth... |
|
vanaf € 97,58*
per stuk |
| 98% |
|
24563400 rack from steel C45 m.5 Ø50h6x2000 (1 zoekresultaat) Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth... |
|
vanaf € 509,46*
per stuk |
| 98% |
|
28660100 rack acetal m.2,0 15,4x11x250 (1 zoekresultaat) Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly o... |
|
vanaf € 11,30*
per stuk |
| 98% |
|
22499605 rack 1.4305 m.1,0 10x10x500 (1 zoekresultaat) Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manuf... |
|
vanaf € 80,01*
per stuk |
| 98% |
|
24111605 rack in steel m.2,0 20x20x1000 (1 zoekresultaat) Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is... |
|
vanaf € 50,72*
per stuk |
| 98% |
|
24199607 rack 1.4305 m.2,0 20x20x1500 (1 zoekresultaat) Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manuf... |
|
vanaf € 342,11*
per stuk |
| 98% |
|
24263100 rack from steel m.2,5 Ø25h6x 500 (1 zoekresultaat) Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth... |
|
vanaf € 66,22*
per stuk |
| 98% |
|
24399607 rack 1.4305 m.3,0 30x30x1500 (1 zoekresultaat) Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manuf... |
|
vanaf € 481,39*
per stuk |
| |
|
