|  | | | | | | | | Afbeelding | | | | Bestellen | | | 98% |
|
24199609 rack 1.4305 m.2,0 20x20x2000 (1 zoekresultaat) Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manuf... |
|
vanaf € 464,98*
per stuk |
| 98% |
|
24463400 rack from steel C45 m.4 Ø40h6x2000 (1 zoekresultaat) Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth... |
|
vanaf € 392,60*
per stuk |
| 98% |
|
24611609 rack in steel m.6,0 60x60x2000 (1 zoekresultaat) Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is... |
|
vanaf € 610,65*
per stuk |
| 98% |
|
26160100 rack Ms58 m. 0,5 w2 4x250 (1 zoekresultaat) Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for... |
|
vanaf € 10,22*
per stuk |
| 98% |
|
26960100 rack Ms58 m.0,3 L250 (1 zoekresultaat) Material: Brass Ms58 (2.0401), milled teeth. 20° helical tooth system, left hand. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to ne... |
|
vanaf € 16,09*
per stuk |
| 98% |
|
28760101 rack polyketone m. 2,5 13x17x250 (1 zoekresultaat) Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +14... |
|
vanaf € 16,57*
per stuk |
| 98% |
|
29360300 rack POM m.1,0 10x10x500 (1 zoekresultaat) Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. ... |
|
vanaf € 27,13*
per stuk |
| 98% |
|
29860700 rack POM m.3,0 25x25x1500 (1 zoekresultaat) Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. ... |
|
vanaf € 172,58*
per stuk |
| 98% |
|
22760100 Gear rack C45K m.1,5 10x10x500 (1 zoekresultaat) Material: Bright steel C45K. Milled teeth. Precisely Straightened. Width tolerance h11. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gea... |
|
vanaf € 29,65*
per stuk |
| 98% |
|
24499607 rack 1.4305 m.4,0 40x40x1500 (1 zoekresultaat) Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manuf... |
|
vanaf € 741,00*
per stuk |
| 98% |
|
25160501 prec.-rack m. 2,0 length 1000 (1 zoekresultaat) Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth syst... |
|
vanaf € 528,08*
per stuk |
| 98% |
|
25360911 prec.-rack m. 3,0 length 2000 (1 zoekresultaat) Material: High-quality, specially treated bright steel with approx. 900 N/mm², tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous link... |
|
vanaf € 687,34*
per stuk |
| 98% |
|
28660101 rack polyketone m.2,0 15,4x11x250 (1 zoekresultaat) Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +14... |
|
vanaf € 13,49*
per stuk |
| 98% |
|
29311601 rack POM m.1,0 15x250 (1 zoekresultaat) Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. ... |
|
vanaf € 17,45*
per stuk |
| 98% |
|
22499608 rack 1.4305 m.1,0 10x10x1000 (1 zoekresultaat) Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manuf... |
|
vanaf € 133,98*
per stuk |
| |
|
