|  | | | | | | | | Afbeelding | | | | Bestellen | | | 98% |
|
24263200 rack from steel m.2,5 Ø25h6x1000 (1 zoekresultaat) Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth... |
|
vanaf € 131,56*
per stuk |
| 98% |
|
24299631 rack 1.4305 m.2,5 Ø 25h9x500 (1 zoekresultaat) Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufa... |
|
vanaf € 150,84*
per stuk |
| 98% |
|
24360700 Gear rack C45K m.3,0 30x30x1500 (1 zoekresultaat) Material: Bright steel C45K. Milled teeth. Precisely Straightened. Width tolerance h11. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gea... |
|
vanaf € 177,10*
per stuk |
| 98% |
|
24463000 rack from steel m.4 Ø40h6x250 (1 zoekresultaat) Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth... |
|
vanaf € 83,03*
per stuk |
| 98% |
|
24499605 rack 1.4305 m.4,0 40x40x1000 (1 zoekresultaat) Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manuf... |
|
vanaf € 499,56*
per stuk |
| 98% |
|
25560510 prec.-rack m. 5,0 L 1000 (1 zoekresultaat) Material: High-quality, specially treated bright steel with approx. 900 N/mm², tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous link... |
|
vanaf € 493,98*
per stuk |
| 98% |
|
28160201 rack polyketone m. 0,5 4x6x250 (1 zoekresultaat) Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +14... |
|
vanaf € 2,17*
per stuk |
| 98% |
|
29511601 rack POM m.1,5 17x250 (1 zoekresultaat) Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. ... |
|
vanaf € 19,62*
per stuk |
| 98% |
|
29511603 rack POM m.1,5 17x500 (1 zoekresultaat) Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. ... |
|
vanaf € 37,71*
per stuk |
| 98% |
|
22460800 Gear rack C45K m.1,0 10x10x1000 (1 zoekresultaat) Material: Bright steel C45K. Milled teeth. Precisely Straightened. Width tolerance h11. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gea... |
|
vanaf € 51,05*
per stuk |
| 98% |
|
22465500 Gear rack C45K m.1,0 L500 (1 zoekresultaat) Material: Steel C45K, milled teeth. 20° helical tooth system, left hand. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative to... |
|
vanaf € 35,68*
per stuk |
| 98% |
|
22465800 Gear rack C45K m.1,0 L1000 (1 zoekresultaat) Material: Steel C45K, milled teeth. 20° helical tooth system, left hand. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative to... |
|
vanaf € 62,57*
per stuk |
| 98% |
|
22963200 rack from steel m.1,5 Ø17h6x1000 (1 zoekresultaat) Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth... |
|
vanaf € 120,84*
per stuk |
| 98% |
|
24299609 rack 1.4305 m.2,5 25x25x2000 (1 zoekresultaat) Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manuf... |
|
vanaf € 509,59*
per stuk |
| 98% |
|
26360500 rack Ms58 m.1,0 w=10 10x500 (1 zoekresultaat) Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for... |
|
vanaf € 54,21*
per stuk |
| |
|
