pa  (87.018 artikelen gevonden)

ICL7611, ICL7612, 1.4MHz, Low Power CMOS Operational Amplifiers, Intersil. Operating Voltage range ±1 V to ±8 V High Input Impedance 10¹² Ω Programmable Power Consumption Input Current 1 pA (Typica...

TSX63x, TSX63xA, Micro-Power, Rail-to-Rail I/O, 16 V CMOS Operational Amplifiers. Low power consumption: 60 μA max. (16 V) Power supply operation from 3.3 V to 16 V Gain bandwidth product: 200 kHz ...

ICL7621, Dual, Low Power CMOS Operational Amplifier, Intersil. Operating Voltage range ±1 V to ±8 V High Input Impedance 10¹² Ω Input Current 1 pA (Typical)

ICL7621, Dual, Low Power CMOS Operational Amplifier, Intersil. Operating Voltage range ±1 V to ±8 V High Input Impedance 10¹² Ω Input Current 1 pA (Typical)

NCS2001, NCV2001, 0.9V, Rail-to-Rail I/O, Operational Amplifier, ON Semiconductor. 0.9 V Guaranteed Operation No Output Phase Reversal for Over−Driven Input Signals Trimmed Input Offset 0.5 mV Inpu...

NCS2001, NCV2001, 0.9V, Rail-to-Rail I/O, Operational Amplifier, ON Semiconductor. 0.9 V Guaranteed Operation No Output Phase Reversal for Over−Driven Input Signals Trimmed Input Offset 0.5 mV Inpu...

The DG4051E, DG4052E, and DG4053E are high precision CMOS analog multiplexers. The DG4051E is an 8-channel multiplexer, the DG4052E is a dual 4-channel multiplexer, and the DG4053E is a triple 2-ch...

Optimized for Headsets and High-Current Outputs 200mA Output Drive Capability 100dB Voltage Gain (RL = 100kΩ) 85dB Power-Supply Rejection Ratio No Phase Reversal for Overdriven Inputs Unity-Gain St...

ICL7650S, 2MHz, Super Chopper-Stabilised Operational Amplifier, Intersil. Guaranteed Max. Input Offset Voltage for All Temperature ranges Low Long-Term and Temperature Drifts of Input Offset Voltag...

NCS20062, 5V, 3MHz, Rail-to-Rail I/O, Dual Operational Amplifier, ON Semiconductor. The ON Semiconductor NCS20062 operational amplifiers provide rail-to-rail input and output operation and 3 MHz ba...

ICL7650S, 2MHz, Super Chopper-Stabilised Operational Amplifier, Intersil. Guaranteed Max. Input Offset Voltage for All Temperature ranges Low Long-Term and Temperature Drifts of Input Offset Voltag...

MCP601 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 uA and an offset voltage that is less than 2 mV. The MCP601 uses Microchips a...

Available in Space-Saving UCSP, SOT23, and μMAX® Packages Low Distortion: 0.0002% THD (1kΩ load) 400μA Quiescent Supply Current per Amplifier Single-Supply Operation from 2.4V to 5.5V Input Common-...

The NCx2007x series operational amplifiers provide rail−to−rail output operation, 3 MHz bandwidth, and are available in single, dual, and quad configurations. Rail−to−rail operation enables the use...

The MCP607 dual operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 and an offset voltage that is less than 250 μV. The MCP607 uses M...