oscilloscopes  (2.273 artikelen gevonden)

Accessory Type = Probe Tip For Use With = R&S®RT-ZP10 and R&S®RT-ZP1X Passive Probes

Accessory Type = PCB Adapter For Use With = R&S®RT-ZP10 and R&S®RT-ZP1X Passive Probes

Pico Technology Differential Oscilloscope KitThe Pico Technology PICOSCOPE 4444 1000 V CAT III Kit is a 20Mhz high-resolution differential oscilloscope with three passive differential voltage probe...

TA050 attenuators must be used with a matched 50Ω source and load. If users wish to attenuate a signal before feeding it into a high-impedance measuring instrument, they must add a 50Ω feedthrough ...

Adapter Type = Dual Banana Jack to BNC Male For Use With = RT Model Number p = RT-ZA11

Accessory Type = Mini Clips For Use With = Passive Probes

Accessory Type = Probe Power Supply For Use With = R&S®RT-ZP10 and R&S®RT-ZP1X Passive Probes

Pico 2.5 mm Oscilloscope Probe Standard Accessory Kit TA067. Pico TA067 is a standard accessory kit for 2.5 mm passive probes. The TA067 kit contains:15cm ground lead; 2.5mm insulating cap; 2.5mm P...

Accessory Type = Probe Positioner For Use With = R&S®RT-ZP10 and R&S®RT-ZP1X Passive Probes

Probe Type = High Frequency Probe Bandwidth = 2MHz Model Number p = RT-ZC05B Series = RT-ZC

Accessory Type = Mini Clips For Use With = Passive Probes

Pico Probe Tip to BNC Adapter TA152. Pico TA152 is a useful adapter designed for connecting an oscilloscope probe tip directly to the BNC input of a DUT or source. This accessory is compatible with...

Accessory Type = Lead Set For Use With = Oscilloscope Probe

The Rohde & Schwarz RT-ZHD ±1500V high voltage differential probe with 200MHz bandwidth is ideal for measurements on fast-switching semiconductors. Its extraordinarily low added noise results in hi...

Probe Type = High Frequency Probe Bandwidth = 10MHz Connector Type = BNC Model Number p = RT-ZC10B Series = RT-ZC