ibhsoftec  (19 artikelen gevonden)

The Flash PROMMER used to program the new Memory Cards (Flash PROMMS) of the S5 and the S7-300 or S7-400 series. As with our other Eprommer the modules are programmed directly from our user interfa...

The USB Prommer (Siemens) is about STEP5, STEP7 and S5 / S7 for Windows® approachable. It may S5 Eproms, S5 EEproms, S5 / S7 and S7 Flasheproms Micro Memory Cards can be programmed. Drivers are ava...

The electronics are housed in the massive 15-pin Sub-D connector housing. The 9-pin Sub-D connector is provided for connection to a serial interface (Com1-8) of PCs. The pin assignment is designed ...

The USB-S7 Adapter MPI, PPI DP permits conversion of a USB interface to the PPI bus MPI bus or DP-Bus for the online functions of S7 for Windows® or Step7. USB Adapter S7 MPI, DP has a connecting c...

The IBH USB-S5 adapter is used to connect to the USB port of a PC or notebook. Supply via the USB port. There is no additional power supply needed. Suitable for Windows 2000, Windows XP, Vista, Win...

IBH Link S7 ++ As an inexpensive alternative to traditional PC-SPS connections provides the IBH Link S7 ++ as for communication between PC and S7-200, S7-300 or S7-400. A compact and robust Etherne...

As an inexpensive alternative to traditional PC-PLC connections IBHsoftec the IBH Link S7 ++ HS to the drive configuration for communication between PC and Siemens controllers, PLCs and FDT applica...

If 24V are not available, the power supply to feed the 24 V. The power supply is used with interchangeable plugs for Europe (Euro plug) and USA (NEMA 1) delivered. Input: 100-240V ~ / 47-63Hz / 400...

The IBH Link S5 ++ is a cost effective alternative to conventional SPS-PC connections via Ethernet. If a SIMATIC S5 can be networked via Ethernet to a PC, usually a CP communication processor is us...

For devices that provide no 20mA loop current (20mA passive -TTY- interface), the constant current adapter is provided. In the 15-pole Sub-D casing includes two constant current sources for loop cu...

For devices that provide no 20mA loop current (20mA passive -TTY- interface), the constant current adapter is provided. In the 15-pin D-Sub. housing contains two constant current sources for loop c...

For devices that provide no 20mA loop current (20mA passive -TTY- interface), the constant current adapter is provided. In the 15-pole Sub-D casing includes two constant current sources for loop cu...

Commercially available RJ45 crossover adapter for direct connection of network devices. e.g: IBH Link S7 <-> PC. Current NICs have an autodetect function, whereby the adapter is no longer needed., ...

RJ45 female-female coupling for extending the RJ45 cables., Manufacturer-No: 2053

The use of S7-CX SD card makes a series Embedded PC Beckhoff CX8000 for S7 compatible PLCs and allows access to the time-tested Beckhoff hardware. Since the new S7-CX series behaves SD in combinati...