cables (3.728 artikelen)

4-pole, manufacturer code: 267-324

WAGO System cable, for Rockwell Control Logix, 6 analog inputs for RTD, Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/410-300

WAGO System cable, for Rockwell Control Logix, 6 analog inputs for RTD, Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/410-200

WAGO System cable, for Rockwell Control Logix, 2 x 8 analog inputs (current), Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/406-300

WAGO System cable, for Rockwell Control Logix, 6 analog inputs for RTD, Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/410-100

Wago System cable, for Rockwell Compact Logix, 2 x 16 digital inputs, Length: 3 m, Conductor cross-section: 0.14 mm², manufacturer code: 706-4769/102-300

WAGO System cable, for Rockwell Control Logix, 2 x 8 analog inputs (current), Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/406-200

Wago System cable, for Rockwell Compact Logix, 2 x 16 digital outputs, Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4769/204-300

WAGO System cable, for Rockwell Control Logix, 2 x 8 analog inputs (voltage), Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/407-300

Wago System cable, for Rockwell Control Logix, 2 x 8 analog inputs (voltage), Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/407-200

Wago System cable, for Rockwell Compact Logix, 2 x 16 digital inputs, Length: 2 m, Conductor cross-section: 0.14 mm², manufacturer code: 706-4769/102-200

Wago System cable, for Rockwell Compact Logix, 2 x 16 digital outputs, Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4769/204-200

WAGO System cable, for Rockwell Control Logix, 6 analog inputs (voltage), Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/409-300

WAGO System cable, for Rockwell Control Logix, 6 passive analog inputs, Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/411-300

Wago System cable, for Rockwell Control Logix, 2 x 8 analog inputs (current), Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/406-100

Wago System cable, for Gefanuc 9030, 2 x 8 analog inputs, Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-5030/402-300

WAGO System cable, for Rockwell Control Logix, 6 passive analog inputs, Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/411-200

WAGO System cable, for Rockwell Control Logix, 6 analog inputs (voltage), Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/409-200

Wago System cable, for Rockwell Compact Logix, 2 x 16 digital outputs, Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4769/204-100

Wago System cable, for Rockwell Compact Logix, 2 x 16 digital inputs, Length: 1 m, Conductor cross-section: 0.14 mm², manufacturer code: 706-4769/102-100

WAGO System cable, for Rockwell Control Logix, 6 analog inputs (voltage), Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/409-100

Wago System cable, for Schneider TSX, 2 x 16 digital inputs or outputs, Length: 3 m, Conductor cross-section: 0.14 mm², manufacturer code: 706-3037/301-300

WAGO System cable, for Rockwell Control Logix, 2 x 8 analog inputs (voltage), Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/407-100

Wago System cable, for Schneider TSX, 16 digital inputs and 12 digital outputs, Length: 3 m, Conductor cross-section: 0.14 mm², manufacturer code: 706-3037/304-300

WAGO System cable, for Rockwell Control Logix, 6 passive analog inputs, Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/411-100

Wago System cable, for Gefanuc 9030, 2 x 8 analog inputs, Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-5030/402-200

Wago System cable, for Rockwell Control Logix, 8 analog inputs (current), Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/402-200

Wago System cable, for Rockwell Control Logix, 8 analog inputs (voltage), Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/403-200

Wago System cable, for Schneider TSX, 16 digital outputs for higher voltages, Length: 2 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-3057/201-200

Wago System cable, for Rockwell Control Logix, 8 analog inputs (voltage), var. 1, Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/405-200

Wago System cable, for Rockwell Control Logix, 2 x 16 digital outputs, Length: 1 m, Conductor cross-section: 0.14 mm², manufacturer code: 706-4756/207-100

WAGO System cable, for Rockwell Control Logix, 2 x 16 digital outputs, Length: 3 m, Conductor cross-section: 0.14 mm², manufacturer code: 706-4756/207-300

Wago System cable, for Schneider TSX, 2 x 16 digital inputs or outputs, Length: 2 m, Conductor cross-section: 0.14 mm², manufacturer code: 706-3037/301-200

Wago System cable, for Schneider Modicon Quantum, 2 x 16 digital inputs or outputs for higher voltages, Length: 3 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-3140/300-300

Wago System cable, for Schneider TSX, 16 digital outputs for higher voltages, Length: 1 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-3057/201-100

WAGO System cable, for Rockwell Control Logix, 2 x 16 digital outputs, Length: 2 m, Conductor cross-section: 0.14 mm², manufacturer code: 706-4756/207-200

WAGO System cable, for Rockwell Control Logix, 8 analog inputs (current), var. 1, Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/404-200

WAGO System cable, for Rockwell Control Logix, 2 x 16 digital inputs, Length: 3 m, Conductor cross-section: 0.14 mm², manufacturer code: 706-4756/102-300

Wago System cable, for Rockwell Compact Logix, 2 x 4 analog inputs (current), Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4769/405-300

Wago System cable, for Gefanuc 9030, 2 x 8 analog inputs, Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-5030/402-100

Wago System cable, for Siemens S7-300, 2x 8 digital inputs or outputs for higher voltages, Length: 3 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-2300/306-300

WAGO System cable, for Rockwell Control Logix, 8 analog inputs (current), var. 1, Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/404-100

WAGO System cable, for Rockwell Control Logix, 8 analog inputs (voltage), Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/403-100

Wago System cable, for Schneider TSX, 2 x 16 digital inputs or outputs, Length: 1 m, Conductor cross-section: 0.14 mm², manufacturer code: 706-3037/301-100

WAGO System cable, for Rockwell Control Logix, 8 analog inputs (voltage), var. 1, Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/405-100

WAGO System cable, for Siemens S7-1500, 8 analog outputs (voltage), Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/503-300

WAGO System cable, for Rockwell Control Logix, 2 x 16 digital inputs, Length: 2 m, Conductor cross-section: 0.14 mm², manufacturer code: 706-4756/102-200

Wago System cable, for Gefanuc 9030, 16 digital outputs for higher voltages, Length: 3 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/200-300

Wago System cable, for Gefanuc 9030, 16 digital inputs for higher voltages, Length: 3 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/100-300

WAGO System cable, for Siemens S7-1500, 8 analog outputs (voltage), Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/503-200

Wago System cable, for Gefanuc 9030, 2x 8 digital inputs or outputs for higher voltages, Length: 3 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/301-300

Wago System cable, for Siemens S7-300, 2x 8 digital inputs or outputs for higher voltages, Length: 2 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-2300/306-200

Wago System cable, for Siemens S7-300, 2 x 4 analog inputs, Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2300/408-300

WAGO System cable, for Schneider Modicon Quantum, 2 x 16 digital inputs or outputs for higher voltages, Length: 2 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-3140/300-200

WAGO System cable, for Rockwell Compact Logix, 2 x 4 analog inputs (current), Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4769/405-100

WAGO System cable, for Schneider Modicon Quantum, 2 x 8 analog inputs, Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-3140/402-300

WAGO Interface module for system wiring, Pluggable connector per DIN 41651, Male connector, 20-pole, 16-channel relay output, 1 make contact, Double-deck PCB terminal blocks, in mounting carrier, m...

Wago System cable, for Siemens S7-400, 2x 8 digital outputs for higher voltages, Length: 3 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-2400/202-300

Wago System cable, for Siemens S7-300, 2x 8 digital inputs or outputs for higher voltages, Length: 1 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-2300/306-100

WAGO System cable, for Siemens S7-1500, 8 analog outputs (voltage), Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/503-100

WAGO System cable, for Siemens S7-1500, 5 analog inputs and 2 analog outputs, voltage, Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/600-300

Wago System cable, for Gefanuc 9030, 6 digital outputs for higher voltages, Length: 3 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/204-300

Wago System cable, for Gefanuc 9030, 5 digital outputs for higher voltages, Length: 3 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/203-300

WAGO System cable, for Gefanuc 9030, 16 digital outputs for higher voltages, Length: 2 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/200-200

Wago System cable, for Gefanuc 9030, 8 digital inputs or outputs for higher voltages, Length: 3 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/302-300

Wago System cable, for Siemens S7-1500, 8 analog outputs (current), Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/502-300

WAGO System cable, for Gefanuc 9030, 2x 8 digital inputs or outputs for higher voltages, Length: 2 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/301-200

WAGO System cable, for Gefanuc 9030, 16 digital inputs for higher voltages, Length: 2 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/100-200

WAGO System cable, for Schneider Modicon Quantum, 2 x 16 digital inputs or outputs for higher voltages, Length: 1 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-3140/300-100

WAGO System cable, for Rockwell Control Logix, 8 analog outputs (current), Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/503-300

Wago System cable, for Siemens S7-1500, 8 Analog Current Inputs, Spec. Wiring, Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/405-200

WAGO System cable, for Siemens S7-300, 2 x 4 analog inputs, Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2300/408-200

WAGO System cable, for Siemens S7-1500, 8 Analog Current Inputs, Spec. Wiring, Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/405-300

WAGO System cable, for Schneider Modicon Quantum, 2 x 8 analog inputs, Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-3140/402-200

WAGO System cable, for Gefanuc 9030, 16 digital inputs for higher voltages, Length: 1 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/100-100

WAGO System cable, for Gefanuc 9030, 16 digital outputs for higher voltages, Length: 1 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/200-100

WAGO System cable, for Gefanuc 9030, 2x 8 digital inputs or outputs for higher voltages, Length: 1 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/301-100

Wago System cable, for Gefanuc 9030, 5 digital outputs for higher voltages, Length: 2 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/203-200

Wago System cable, for Gefanuc 9030, 8 digital inputs or outputs for higher voltages, Length: 2 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/302-200

WAGO System cable, for Siemens S7-1500, 8 analog outputs (current), Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/502-200

Wago System cable, for Gefanuc 9030, 6 digital outputs for higher voltages, Length: 2 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-5030/204-200

WAGO System cable, for Siemens S7-1500, 5 analog inputs and 2 analog outputs, voltage, Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/600-200

WAGO System cable, for Siemens S7-1500, 8 analog inputs (current), Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/400-200

Wago System cable, for Gefanuc 9030, 8 analog outputs (current), Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-5030/500-300

Wago System cable, for Siemens S7-400, 2x 8 digital outputs for higher voltages, Length: 2 m, Conductor cross-section: 0.34 mm², manufacturer code: 706-2400/202-200

WAGO System cable, for Siemens S7-1500, 4 analog inputs and 2 analog outputs, voltage, current, version 2, Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/602-300

Wago System cable, for Rockwell Control Logix, 6 analog outputs, Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/502-200

Wago System cable, for Gefanuc 9030, 8 analog outputs (voltage), Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-5030/501-300

WAGO System cable, for Rockwell Control Logix, 8 analog outputs (voltage), Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/504-300

Wago System cable, for Rockwell Control Logix, 8 analog outputs (voltage), Length: 2 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/504-200

WAGO System cable, for Siemens S7-1500, 4 analog inputs and 2 analog outputs, voltage, current, version 1, Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/601-300

WAGO System cable, for Rockwell Control Logix, 6 analog outputs, Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-4756/502-300

Wago System cable, for Siemens S7-1500, 4 analog inputs and 2 analog outputs, voltage, Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/603-300

Wago System cable, for Siemens S7-1500, 8 Analog Current Inputs, Spec. Wiring, Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/405-100

WAGO System cable, for Schneider Modicon Quantum, 2 x 8 analog inputs, Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-3140/402-100

WAGO System cable, for Siemens S7-1500, 4 analog inputs (current), Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/402-300

WAGO System cable, for Siemens S7-1500, 2 x 16 digital inputs or outputs, Length: 3 m, Conductor cross-section: 0.14 mm², manufacturer code: 706-2500/301-300

WAGO System cable, for Siemens S7-1500, 5 analog inputs and 2 analog outputs, voltage, Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/600-100

WAGO System cable, for Siemens S7-1500, 4 analog inputs (voltage), Length: 3 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/403-300

WAGO System cable, for Siemens S7-1500, 8 analog outputs (current), Length: 1 m, Conductor cross-section: 0.25 mm², manufacturer code: 706-2500/502-100