Sensor Accessories (511 artikelen)

The Sick adapter plate is belongs to mounting plates family. It is made up of aluminium.This plate is used for mounting from W14 to G10

The Sick nuts of nickel plated brass.two piecesNoteProduct details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.

Accessory Type = Mounting Bracket For Use With = RightSight Photoswitch Series

The Sick adapter which belongs to mounting plates family is used for mounting W16 sensors. It is made up of plastic.It is used in W14-2 / W18-3 installations Fastening screws included

L41 Single Beam Safety System. The L41 is a type 4 (IEC61496) cascadable single-beam photoelectric safety switch comprising of a sender and a receiver. The correct function of the L41 can be checke...

Mounting plate for M12 sensorsFor use with M12 sensorsNote

Mounting plate for M18 sensorsFor use with M18 sensorsNote

Mounting plate for M30 sensorsFor use with M30 sensorsNote

Mounting bracket for M12 sensorsFor use with M12 sensorsNote

Accessory Type = Protective Cap For Use With = Socket Series = DOS

Accessory Type = Terminal Bracket For Use With = Sensors Application = Mounting Series = BEF Mounting Type = Chassis Mount Material = Plastic

Mounting plate for M8 sensorsFor use with M8 sensorsNote

Mounting bracket for M8 sensorsFor use with M8 sensorsNote

Accessory Type = Protective Cap For Use With = Backplane Bus Series = FLX0

Mounting bracket for mounting on SMC rails ECDQ2 (T-slot).For use with SICK cylinder sensorsNote

Mounting bracket for cylinder with dovetail slot.For use with SICK cylinder sensorsNote

Mounting bracket for mounting on SMC rails CDQ2 (T-slot).For use with SICK cylinder sensorsNote

OverviewAt a glanceYour BenefitThe SICK 14mm shaft reducing collet for DBS60 hollow shaft encoders. This shaft reducing collet is designed to reduce the shaft diameter of hollow shaft DBS60 encoder...

OverviewAt a glanceYour BenefitThe SICK 8mm shaft reducing collet for DBS60 hollow shaft encoders. This shaft reducing collet is designed to reduce the shaft diameter of hollow shaft DBS60 encoders...

OverviewAt a glanceYour BenefitThe SICK 12mm shaft reducing collet for DBS60 hollow shaft encoders. This shaft reducing collet is designed to reduce the shaft diameter of hollow shaft DBS60 encoder...

OverviewAt a glanceYour BenefitThe SICK 15mm shaft reducing collet for DBS60 hollow shaft encoders. This shaft reducing collet is designed to reduce the shaft diameter of hollow shaft DBS60 encoder...

OverviewAt a glanceYour BenefitThe SICK 10mm shaft reducing collet for DBS60 hollow shaft encoders. This shaft reducing collet is designed to reduce the shaft diameter of hollow shaft DBS60 encoder...

Accessories for M18 Sensors. Mounting brackets and locknuts for use with M18 sensors.

Mounting bracket on round body cylinder with piston diameter of 40mmAmbient temperature is min 0 °C and max 50 °CNote

Mounting bracket on round body cylinder with piston diameter of 16mm.Ambient temperature is min 0 °C and max 50 °CNote

Mounting bracket on round body cylinder with piston diameter of 20mm.Ambient temperature is min 0 °C and max 50 °CNote

Mounting bracket on round body cylinder with piston diameter of 40mm.Ambient temperature is min 0 °C and max 50 °CNote

Mounting bracket on round body cylinder with piston diameter of 63mm.Ambient temperature is min 0 °C and max 50 °CNote

Mounting bracket on round body cylinder with piston diameter of 20mmAmbient temperature is min 0 °C and max 50 °CNote

Mounting bracket on round body cylinder with piston diameter of 32mmAmbient temperature is min 0 °C and max 50 °CNote

Mounting bracket on round body cylinder with piston diameter of 63mmAmbient temperature is min 0 °C and max 50 °CNote

Mounting bracket on round body cylinder with piston diameter of 32mm.Ambient temperature is min 0 °C and max 50 °CNote

Mounting bracket on round body cylinder with piston diameter of 12mmAmbient temperature is min 0 °C and max 50 °CNote

Mounting bracket on round body cylinder with piston diameter of 16mmAmbient temperature is min 0 °C and max 50 °CNote

Mounting bracket on round body cylinder with piston diameter of 25mmAmbient temperature is min 0 °C and max 50 °CNote

Mounting bracket for round body cylinders with diameter up to 85 mmFor use with SICK MPA sensorNote

Mounting bracket on round body cylinder with piston diameter of 50mm.Ambient temperature is min 0 °C and max 50 °CNote

Mounting bracket on round body cylinder with piston diameter of 12mm.Ambient temperature is min 0 °C and max 50 °CNote

Mounting bracket on round body cylinder with piston diameter of 50mmAmbient temperature is min 0 °C and max 50 °CNote

Mounting bracket on round body cylinder with piston diameter of 25mm.Ambient temperature is min 0 °C and max 50 °CNote

Mounting bracket to for round body cylinders with diameter up to 135 mmFor use with SICK MPA sensorNote

Accessory Type = Mounting Bracket & Plate For Use With = Sensors Application = Mounting Series = BEF Mounting Type = Chassis Mount

The Sick mounting bracket for W9-3Made up of steelNoteProduct details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.

Accessory Type = Reflective Tape Series = REF Mounting Type = Self-Adhesive Minimum Temperature = -20°C Maximum Temperature = +60°C

Accessory Type = Alignment Bracket For Use With = Sensors Application = Mounting Series = BEF Mounting Type = Chassis Mount Material = Plastic

Mounting bracket to for round body cylinders with diameter up to 210 mmFor use with SICK MPA sensorNote

SICK Miniature Cylinder Sensors. Magnetic cylinder sensors are used for detection, measuring and positioning in many crucial tasks. PA12 plastic body material Suitable for T-slot and round-slot cyl...

Magnet with mounting hole for M3 countersunk screw, Ø 15.2 mm, height 6 mmFor use with SICK Magnetic sensors and MPANote

This SICK shaft collet is designed to reduce the internal bore diameter of DBS36E-BBxx encoders from 8mm to 6mm. This item simply slides into the 8mm encoder bore and is compressed onto a 6mm drive...

Terminal and alignment brackets For use with M5 sensorsMade up of plastic (PA6) materialNote

Terminal and alignment brackets For use with M4 sensorsMade up of plastic (PA6) materialNote

W4S-3 Inox Photoelectric Sensor ; Accessories. Compact, robust and designed to withstand aggressive production and cleaning procedures, providing reliable detection of small, transparent and very r...

Terminal and alignment brackets For use with M3 sensorsMade up of plastic (PA6) materialNote

Terminal and alignment brackets For use with M6 sensorsMade up of plastic (PA6) materialNote

Accessory Type = Cable & Connector For Use With = Sensors Application = Connection Series = DOL Cable Length = 200mm Plug/Socket = Socket Terminal Type = Female Connector, Flying Leads Probe Diamet...

Magnet with mounting hole for M4 countersunk screw, Ø 20 mm, height 6.5 mmFor use with SICK Magnetic sensors and MPANote

Magnet without mounting hole, Ø 6 mm, height 25 mmFor use with SICK Magnetic sensors and MPANote

Two identical miniTwin-stick packages MUST always be ordered for a complete system .,Cable: Each miniTwin is supplied with an M12 5-pin 1-way system plug. To cascade 3 pairs you will need 2 x casca...

Mounting bracket on round body cylinder with piston diameter of 1mm to 25mm.Ambient temperature is min –30 °C and max 80 °CNote

Mounting bracket on round body cylinder with piston diameter of 8mm to 130mmAmbient temperature is min –30 °C and max 80 °CNote

Mounting bracket on round body cylinder with piston diameter of 1mm to 130mmAmbient temperature is min –30 °C and max 80 °CNote

Accessory Type = Reflectors For Use With = Sensors Application = Reflectors Series = PL Mounting Type = Chassis Mount Minimum Temperature = -30°C Maximum Temperature = +65°C Shape = Round Material ...

Mounting bracket on round body cylinder with piston diameter of 8mm to 25mmAmbient temperature is min –30 °C and max 80 °CNote

Accessory Type = Actuator For Use With = RE31-Dxxx Series = RE31

Bracket for lateral mountingFor use with SICK MPA sensorNote

Accessory Type = Protection Accessory For Use With = LPC-W12-3 Series = LPC Material = PMMA

Accessory Type = Encoder Servo Clamps For Use With = Servo Flange Encoders Application = Encoder Mounting Series = BEF Bore Size = 4.2mm

The Sick clamping bracket is used for rods with a diameter of 12 mm.Made up of aluminiumNote

Servo clamps, small, for servo flange (clamping claws, mounting eccentric), 3 pcs, without mounting hardware.For use with SICK ACS/ACM36 absolute encoderNote

The Sick mounting brackets for G6.Made up of stainless steelNoteProduct details cover the whole product family. For details on the specifications for this individual product, please refer to the da...

Accessories for M18 Sensors. Mounting brackets and locknuts for use with M18 sensors.

Accessory Type = Reflectors For Use With = Sensors Application = Reflectors Series = PL Mounting Type = Chassis Mount

Accessories for M18 Sensors. Mounting brackets and locknuts for use with M18 sensors.

Accessory Type = Mounting Bar For Use With = Bar Clamp Application = Mounting Series = BEF Shape = Cylindrical Material = Steel

Mounting bracketFor use with SICK W260Note

Bracket for low mountingFor use with SICK MPA sensorNote

Accessory Type = Mounting Bar For Use With = Bar Clamp Application = Mounting Series = BEF Shape = Cylindrical Material = Steel

Accessory Type = Actuator For Use With = RE15-Sxxx Series = RE15

Mounting bracket for M12 housingFor use with M12 sensorsNote

Mounting plate for M12 sensorsFor use with M12 sensorsNote

Accessory Type = Reflectors For Use With = Sensors Application = Reflectors Series = PL Mounting Type = Chassis Mount Minimum Temperature = -30°C Maximum Temperature = +90°C Shape = Round Material ...

Clamping block for round sensors M8, without fixed stop.For use with M8 sensorsNote

The Sick mounting brackets suitable for WLL180T, GLL170.Made up of Steel Zinc coatedNoteProduct details cover the whole product family. For details on the specifications for this individual product...

Clamping block for round sensors M8, with fixed stop.For use with M8 sensorsNote

Accessory Type = Reflectors For Use With = Sensors Application = Reflectors Series = PL Mounting Type = Chassis Mount

Mounting bracketFor use with SICK WLL170Note

W2 Series - Subminiature. ABS housing Narrow light beam Visible red light source Short circuit and reverse polarity protection Operating temperature range –20 to +50°C Optional bracket mount For PL...

Reflectors. SICK range of reflectors are an indispensable counterpart for all retroreflective photoelectric sensors. The large selection of reflectors in different shapes and sizes guarantees optim...

Accessory Type = Mounting Bar For Use With = Bar Clamp Application = Mounting Series = BEF Shape = Cylindrical Material = Steel

Mounting bracket for integrated profile cylinder/tie-rod cylinderFor use with SICK cylinder sensorsNote

Mounting bracket for wall mountingFor use with SICK W4-3Note

Mounting bracketFor use with SICK W23-2, W27-3, Reflex ArrayNote

Mounting bracket for integrated profile cylinder/tie-rod cylinderFor use with SICK cylinder sensorsNote

Mounting bracket to tie-rod cylinder (diameter tie-rod max. 18 mm)For use with SICK MPA sensorNote

Barium Ferrite Magnet. Ambient temperature range -25 to +130°C

Clamping block for round sensors M12, without fixed stop.For use with M12 sensorsNote

Clamping block for round sensors M12, with fixed stop.For use with M12 sensorsNote

Reflectors. SICK range of reflectors are an indispensable counterpart for all retroreflective photoelectric sensors. The large selection of reflectors in different shapes and sizes guarantees optim...

Mounting bracketFor use with SICK WTR/WLR, IRT, RNote

Accessory for ultrasonic channelling for the product family UC4For use with SICK UC4 ultrasonic sensorNote